Shop that turns slotted/drilled rotors?

General car discussion and other related topics of interest for MN 3/S members.
Post Reply
guido1205us
Senior Member
Posts: 283
Joined: Sun Aug 16, 2009 7:06 pm
Location: Mpls

Shop that turns slotted/drilled rotors?

Post by guido1205us » Wed Sep 18, 2013 12:21 am

Know of one? Last 10 most common brake shops that I've called all wimped out. My new stop tech I bought last year and just got around installing came warped.

Note to self - quit being lazy and install product asap before return window is closed.
The Toys
Image

User avatar
bluejediz
Senior Member
Posts: 181
Joined: Wed Jul 01, 2009 4:07 pm

Re: Shop that turns slotted/drilled rotors?

Post by bluejediz » Thu Sep 19, 2013 12:23 am

Was the hub clean when you installed the new rotors? Sometimes a piece of rust or other debris can get in between the hub and the rotor and cause a pulsation even when the rotors are okay.
Otherwise I've turned several drilled and slotted rotors before, so I can bring them to my shop and turn them.
-1995 Dodge Stealth RT/TT Blue Pearl
Full ATR exhaust, Gutted Precats, Blitz DSBC, PreTurbo Hard Pipes.

-1991 Dodge Stealth RT/TT - SOLD

guido1205us
Senior Member
Posts: 283
Joined: Sun Aug 16, 2009 7:06 pm
Location: Mpls

Re: Shop that turns slotted/drilled rotors?

Post by guido1205us » Thu Sep 19, 2013 3:32 pm

Pretty sure they were, but I'll check again. Also, thanks for the offer to turn them. I'll let you know after I can confirm they need to be turned.

Thanks.
The Toys
Image

TT motorsports
New Member
Posts: 3
Joined: Tue May 06, 2014 9:36 pm

Re: Shop that turns slotted/drilled rotors?

Post by TT motorsports » Tue May 06, 2014 10:05 pm

bluejediz wrote:Was the hub clean when you installed the new rotors? Sometimes a piece of rust or other debris can get in between the hub and the rotor and cause a pulsation even when the rotors are okay.
Otherwise I've turned several drilled and slotted rotors before, so I can bring them to my shop and turn them.
Hey Blujediz, does your shop turn drilled and slotted regularly or do you just do it on your own for friends?

User avatar
bluejediz
Senior Member
Posts: 181
Joined: Wed Jul 01, 2009 4:07 pm

Re: Shop that turns slotted/drilled rotors?

Post by bluejediz » Wed May 07, 2014 5:12 pm

We don't see very many drilled/slotted rotors since most vehicles we work on aren't performance orientated. But the few that we have done machined just like any other rotors would.
-1995 Dodge Stealth RT/TT Blue Pearl
Full ATR exhaust, Gutted Precats, Blitz DSBC, PreTurbo Hard Pipes.

-1991 Dodge Stealth RT/TT - SOLD

Post Reply